Toggle light / dark theme

The main benefit of an interstellar mission is to carry out in-situ measurements within a target star system. To allow for extended in-situ measurements, the spacecraft needs to be decelerated. One of the currently most promising technologies for deceleration is the magnetic sail which uses the deflection of interstellar matter via a magnetic field to decelerate the spacecraft. However, while the magnetic sail is very efficient at high velocities, its performance decreases with lower speeds. This leads to deceleration durations of several decades depending on the spacecraft mass. Within the context of Project Dragonfly, initiated by the Initiative of Interstellar Studies (i4is), this paper proposes a novel concept for decelerating a spacecraft on an interstellar mission by combining a magnetic sail with an electric sail. Combining the sails compensates for each technologys shortcomings: A magnetic sail is more effective at higher velocities than the electric sail and vice versa. It is demonstrated that using both sails sequentially outperforms using only the magnetic or electric sail for various mission scenarios and velocity ranges, at a constant total spacecraft mass. For example, for decelerating from 5% c, to interplanetary velocities, a spacecraft with both sails needs about 29 years, whereas the electric sail alone would take 35 years and the magnetic sail about 40 years with a total spacecraft mass of 8250 kg. Furthermore, it is assessed how the combined deceleration system affects the optimal overall mission architecture for different spacecraft masses and cruising speeds. Future work would investigate how operating both systems in parallel instead of sequentially would affect its performance. Moreover, uncertainties in the density of interstellar matter and sail properties need to be explored.

The Msail (Magnetic Sail) consists of a superconducting coil and support tethers which connect it to the spacecraft and transfer the forces onto the main structure. The current through the coil produces a magnetic field. When the spacecraft has a non-zero velocity, the stationary ions of the interstellar medium are moving towards the sail in its own reference frame. The interaction of ions with the magnetosphere of the coil leads to a momentum exchange and a force on the sail, along the direction of the incoming charged particles.

According to Zubrin, the current densities of superconductors can reach up to jmax = 2 · 1010A/m2 and this is the value used in the analysis. For the material of the sail, the density of common superconductors like copper oxide (CuO) and YBCO was used, with ρMsail = 6000 kg/m3.

Read more

Robotic in orbit assembly and laser propulsion could enable vast increases in space capability while not significantly changing the world civilization energy budget.

Robotic and additive manufacturing could enable massive frames and massive solar power arrays.

Tethers Unlimited is currently developing a revolutionary suite of technologies called “SpiderFab” to enable on-orbit fabrication of large spacecraft components such as antennas, solar panels, trusses, and other multifunctional structures. SpiderFab provides order-of-magnitude packing- and mass- efficiency improvements over current deployable structures and enables construction of kilometer-scale apertures within current launch vehicle capabilities, providing higher-resolution data at lower life-cycle cost.

Read more

Researchers from the University of California has developed magnesium based super strong metal also very light weight. This new material composition of magnesium infused with ceramic silicon nanoparticles. This new technique nanoparticles boost the strength materials. Usage of nanoparticles also provides flexibilty to the materials.

Research main target extremely strong and lightweight metal can be used is space projects

In order to use this extremely strong and lightweight metal for space-exploration projects, the researchers developed a new method in dispersing and stabilizing nanoparticles in molten metals.

Read more

The Boeing Co. is one of two companies funded by NASA to develop spacecraft for the International Space Station. Its CST-100 Starliner is expected to fly with an astronaut on board no earlier than 2017.

The firm is best known for its large passenger jets. In space, it has performed work on the space shuttle and the ISS, among other projects.

The CST-100 is similar in shape to the Apollo spacecraft, but should have electronics that are half a century more advanced. Its gumdrop shape also looks somewhat like the Orion Crew Exploration Vehicle being constructed right now by Lockheed Martin and its partners. Orion is designed to carry astronauts beyond low Earth orbit.

Read more

In a bold but scientifically sound proposal, NASA-funded research has laid out a roadmap toward spacecraft with relativistic speeds for the exploration of nearby stars (Credit: NASA). View gallery (8 images)

How do you send man-made probes to a nearby star? According to NASA-funded research at the University of California, Santa Barbara (UCSB), the answer is simple: assemble a laser array the size of Manhattan in low Earth orbit, and use it to push tiny probes to 26 percent the speed of light. Though the endeavour may raise a few eyebrows, it relies on well-established science – and recent technological breakthroughs have put it within our reach.

Read more