Lifeboat Foundation: Safeguarding Humanity
Toggle light / dark theme

Blog

Category: 3D printing

image credit - Protomag.com

Technology for pain-free healing:

“Your threshold for pain is near zero”, said my dentist, as she deftly moved the extremely thin fiber optic laser head away.

“That’s why I chose to fly in here. Gum filet carving doesn’t appeal to me”, I mumbled, my lips feeling leathery from the anesthetic spray.

There was a mild tingling as the laser killed millions of enemies under my gum-line. I lay back in the chair and considered the alternative I was presented only the day before by an over enthusiastic periodontist — A scalpel and suture gum flap procedure for “deep cleaning.”

‘This is 2013′, I had thought to myself. ‘There has to be a less primitive way… a less painful solution.’

12 hours later, with 25 browser windows open and an estimated further 40 websites bookmarked, I was sure I had enough information to consider writing a thesis on pain free dentistry — The answer, I concluded, was LANAP. I delved deep into the pros and cons of laser dentistry procedures, understanding OPG xrays, doing comparisons and reading on soft tissue lasers, diode lasers, wave-lengths and even the patent wars of companies spearheading the future of medical technology.

The Transhumanist Patient:

Doctors have it hard today and I genuinely sympathize with them- to a certain degree. After all, every person has access to the internet but not everyone knows how to distill this ‘open source knowledge’ effectively. So doctors stand to lose patients and patience, when catering to the whims of clients walking into their clinics.

Yet, we are in the midst of an information and knowledge explosion and if doctors rely only on a degree earned about a decade ago or even 3 years ago, while not immersing themselves in the accelerating changes in technology and discoveries in their field, they will encounter a patient who will challenge or at the very least — question such a doctor’s line of diagnosis and treatment.

I learned the following:

  • Ask for a 3rd opinion — That second-opinion should be one’s own obligation, using the internet as an interactive medical encyclopedia to thoroughly understand the ailment.
  • A medical practitioner who does not have access to the latest in medical technology and/or has not updated their skill-set in the usage of such, will lose out.
  • Tele-medicine is the future.

http://www.youtube.com/watch?v=AUKVV_JyVUE

Services such as Medcarelive, that offer a flavor of tele-medicine is just the start. Competition will soon catch-up and there is no doubt, the smart phone will truly become ubiquitous with personal healthcare. Devices such as Google Glass are already providing healthcare professionals with real time updates of patients vital information.

A smart phone coupled to such wearable technology could transform such a visor — into a Wizer — the fictional device from the story Memories with Maya.

Apps for the Smart phone, running sophisticated software and processing algorithms can harness common sensors in the device such as a Microphone, to analyze or transmit a patient’s cough or voice. There’s even a possibility to do ultra-sound imaging with an add-on peripheral. High resolution cameras can transmit detailed imagery and videos for remote diagnostics — and possibly in real-time in some scenarios with tele-medicine.

alivecor-iphone-ecg
(Above: AliveCore Smart-phone device)

The Transhumanist Doctor:

A medical professional who has a genuine love for learning and keeping abreast with technology in his/her field of practice is by very definition — a Transhumanist. Such professionals may not even know of their transhumanist leanings, but by putting into practice what some Transhumanist fashionistas only preach about, a transhumanist doctor is doing actual ground work to better a patients condition, using science and technology. One such (highly respected) person is Dr. Eric Topol and the strides he’s made with his contribution to Wireless Medicine

To be true to the medical profession in this age, one needs to be highly trained and competent in the use of advanced medical technology — Simply attending a 101 or a couple of seminars and training sessions on use of robotic surgery equipment for instance, can lead to severe accidents and can stall the progress of the very technology that we seek to make mainstream.

There are downsides to be aware of if medical practitioners are not thorough in their training and in their own follow-up research in related fields. For example: Should a dentist or surgeon be studying more about lasers in-depth than the system and controls that are present on the console they are using? I would argue yes they should. Learning as much as possible about types of laser, pulse duration, power and even the very type of laser to use for different soft/hard tissue procedures is an important factor that should not be ignored. In robotic surgery systems, should surgeons understand the degree of motion scaling and tremor reduction systems? Just as a true camera professional might learn how much his/her camera lens ‘breathes’, so too should a surgeon be keen on in-depth learning about the technology and tools they are using.

In keeping with the ethics of such emerging technology, it is only appropriate to mention the many ‘accidents’ that have occurred with even the very advanced minimally invasive DaVinci Robotic Surgery system. The video in the link below is worth the approx 10 minutes viewing time. Full link to report :here:

The home of 2025 — Kitchen, living-room, bedroom and the MedPod room:

med-pod3000_armadyne_Elysium_home_medicine (1)

Medical technology has to become affordable, if our quest to better the human condition is to succeed. Pain free or minimally invasive medicine should not only be for the rich. While it is true that private corporations are investing in the manufacture of these systems and thus earn the right to profit from their deployment, access to advanced medicine should be the right of every person - else we run the risk of an Elysium like future.

With smart phones already being deployed in medical diagnostics, it won’t be long before personal health pods find a place in homes. Such systems might allow for remote tele-medicine or even remote human assisted surgery to become reality. After all, in the DaVinci Robotic Surgery system, it does not matter if the surgeon is sitting a few feet away at his master console or… across town.

Desktop 3D printed Pharmacies:

Desktop 3D Printing Pharmacies could print out capsules / pills on-demand, or drones could deliver a prescription from a local pharmacy right to one’s door-step.

The future looks good for pain free healing of the human body — and it is up to us to make such technology accessible and affordable.

Roberto A. Ferdman

Researchers at Cornell University have managed to 3D print a loudspeaker, according to the University’s newspaper. Using two customizable 3D printers originally developed at Cornell, a team of graduate mechanical engineering students managed to almost seamlessly print the loudspeaker’s plastic, cond

Read more

The Future of Management Wargaming, Now! By Mr. Andres Agostini
WarGaming
This is an excerpt from the conclusion section of, “…The Future of Management Wargaming , Now…!” that discusses some management theories and practices. To read the entire piece, just click the link at the end of article:

In addition to being aware and adaptable and resilient before the driving forces reshaping the current present and the as-of-now future, there are some extra management suggestions that I concurrently practice:

a) “…human knowledge is doubling every ten years [as per the 1998 standards]…”

b) “…computer power is doubling every eighteen months. the internet is doubling every year. the number of dna sequences we can analyze is doubling every two years…”

c) “…beginning with the amount of knowledge in the known world at the time of Christ, studies have estimated that the first doubling of that knowledge took place about 1700 A.D. the second doubling occurred around the year 1900. it is estimated today that the world’s knowledge base will double again by 2010 and again after that by 2013…”

d) “…knowledge is doubling by every fourteen months…”

e) “…more than the doubling of computational power [is taking place] every year…”

f) “…The flattening of the world is going to be hugely disruptive to both traditional and developed societies. The weak will fall further behind faster. The traditional will feel the force of modernization much more profoundly. The new will get turned into old quicker. The developed will be challenged by the underdeveloped much more profoundly. I worry, because so much political stability is built on economic stability, and economic stability is not going to be a feature of the flat world. Add it all up and you can see that the disruptions and going to come faster and harder. No one is immune ─ not me, not you, not Microsoft. WE ARE ENTERING AN ERA OF CREATIVE DESTRUCTION ON STEROIDS. Dealing with flatism is going to be a challenge of a whole new dimension even if your country has a strategy. But if you don’t have a strategy at all, well, again, you’ve warned…”

DYNAMICS

Accordingly, Andres likewise indicates, “…Transformative and Integrative Risk Management (TAIRM) is also implemented in order to prevent technological surprises to the savvy organization seeking this advice and service by TAIRM, but also to create disruptively technological surprises (managerial ‘…Sputnik Moments…’) for the enterprise’s competitors…”

Please see the full presentation at http://goo.gl/SUg18r and at http://goo.gl/8fdwUP

Valentina Palladino

http://cdn0.sbnation.com/entry_photo_images/9548087/Protocell-Trainers-by-Shamees-Aden_dezeen_ss_3_large_verge_medium_landscape.jpg

At the Wearable Futures conference, London designer and researcher Shamees Aden debuted a running shoe concept that will put your worn out kicks to shame. The shoes, which he’s developing with University of Southern Denmark professor Martin Hanczyc, are 3D printed from a synthetic biological material that can repair itself overnight.

The running shoes are the product of Aden’s study of protocells. The basic protocell molecules are not themselves alive, but can be combined to create living organisms. Mixing different protocells creates different properties, and allows them to be programmed to behave differently depending on heat, light, and pressure. The shoes’ unique construction allows them to be 3D printed to the exact size of the user’s foot, so they would fit like a second skin. While running, the shoes would react to pressure and movement, providing extra cushioning when needed.

“The cells have the capability to inflate and deflate and to respond to pressure,” Aden tells Dezeen. “As you’re running on different grounds and textures it’s able to inflate or deflate depending on the pressure you put onto it and could help support you as a runner.”

Read more

The science-fiction-like world of 3D printing is starting to get some very real attention from Wall Street. This week Jefferies initiated coverage on the sector with “buy” ratings on three of its five major players – 3D Systems, Stratasys, and ExOne – and “holds” on the other two, Arcam and voxeljet. These companies could revolutionize mass manufacturing, Jefferies says, and could even get competition from a bellwether of the traditional printing industry: Hewlett Packard.

In a comprehensive, 97-page research note, Jefferies analyst Peter Misek writes that while 3D printing has been around since the 1980′s, a confluence of factors ranging from improvements in printer speeds to a greater availability of software that produces the digital designs used to create 3D printouts have brought the sector into the mainstream, and it will only continue its climb in years to come.

“Our base scenario envisions an eventual expansion of consumer 3D printers from its hobbyist base into a prototyping tool for ‘creative consumers’ and for home printing of toys to become mainstream,” Misek writes, defining ‘creative consumers’ as those who might favor the craft site Etsy. He says that 3D printing could eventually take a $12.5 billion chunk out of the $22 billion U.S. toy market for its ability to recreate action figures, building sets, craft supplies and more. While some companies insist this development is around the corner — 3D Systems is trying to get a $500 consumer 3D printer on the market in time for the 2014 holiday season — Misek thinks such products won’t debut until 2015 or 2016 at the earliest.

Read more

By On ·

3D printing specialists Solid Concepts is to partner with the wcUAVc for an international student competition to create state-of-the-art, affordable UAVs to seek out hot spots of human activity and warn national park rangers in time to save animals. With poaching still at large in national parks in Africa where staff are limited, the outcomes could be very beneficial indeed.

The wcUAVc, founded by Princess Aliyah Pandolfi – a well known animal preservation activist – sought out Solid Concepts earlier in the year for advise and sponsorship regarding this challenge. Pandolfi and Solid Concepts strongly believe that 3D printing, which has already helped to lower the costs of manufacturing in many other industries, could help to lower costs as well as enhance and widen possibilities for UAVs.

A key to this challenge is creating a UAV that can fly for long periods of time, is easy to use and doesn’t require heavy maintenance. After consulting with researchers who have flown UAVs in Africa in the past, it is also clear that a UAV with easily interchangeable parts would be useful, as access to spare parts is nigh on impossible out in the bush lands of Africa’s national wildlife reserves. The drones currently used cost USD$15,000 (£10,000), which increases to $23,000 with the cost of the camera, ground control equipment and training factored in – roughly equal to one ranger’s annual salary.

Read more

‘The Hobbit’ and ‘Ender’s Game’ are making 3D printing Hollywood’s smartest new marketing tool

December 4, 2013 8:16 AM

Ricardo Bilton

Hollywood, despite being ancient and entrenched, is embracing 3D printing in a big way.

To help market The Hobbit: Desolation of Smaug, Warner Bros. will offer fans digital blueprints of “The Key to Erebor,” a key item from the series, which fans can 3D print on their own or send to a company like Shapeways to print for them.

And the Hobbit is not alone. With Ender’s Game, released last month, Hollywood tapped 3D printing company Sandboxr to make 3D-printed replicas of the film’s ships, which fans could tweak and customize to their liking.

Read more

By —

3d printed pizza

For some odd reason, pizza always seems to be at the forefront of emerging technology. It was the first food you could buy via online ordering, the first food to legitimately be delivered via drones, and now it’s dipping its saucy little Italian toes into 3D printing.

Natural Machines, a startup out of Barcelona, has developed a prototype 3D printer called Foodini that can pump out decent, edible-looking pizza just like a normal 3D printer pumps out custom-made lightswitch covers and drain plugs.

Kelsey Campbell-Dollaghan on Gizmodo

How 3D Printers Are Cranking Out Eyes, Bones, and Blood Vessels

At the dawn of rapid prototyping, a common predication was that 3D printing would transform manufacturing, spurring a consumer revolution that would put a printer in every home. That hasn’t quite happened—-and like so many emerging technologies, rapid prototyping has found its foothold in a surprisingly different field: Medicine.

The following studies and projects represent some of the most fascinating examples of “bioprinting,” or using a computer-controlled machine to assemble biological matter using organic inks and super-tough thermoplastics. They range from reconstructing major sections of skull to printing scaffolding upon which stem cells can grow into new bones. More below—and look out for more 3D printing week content over the next few days.

Read more

3d-printed-gun

By Lorenzo Franceschi-Bicchierai

Israeli prime minister Benjamin Netanyahu was speaking at a government function in July when a man sitting a few rows behind him pulled a Liberator, the infamous 3D-printed gun that the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) recently defined as a “lethal weapon.”

The gun posed no real danger. The man bearing it was just a TV reporter trying to prove how easy it is to sneak a 3D-printed plastic gun past security checks that include metal detectors.

See also: First 3D-Printed Metal Gun Fires 50 Rounds and Counting

In the United States, a law prohibits amateur gunsmiths from manufacturing undetectable plastic guns to prevent such a scenario. However, the law is set to expire in just a week, on Dec. 9.

Read more